Steering Guibo Replacement Kit installation notes - E30 w/ Airbag

Please note that this Condor Steering Guibo Replacement Kit only fits in a late model E30 with airbag. You will need to remove the factory E30 lower steering shaft assembly as shown in the photos below.

Cut the end off the lower steering shaft assembly as shown in the photos below.

Cut the shaft as close to the splines as possible.

Clean the splines.

Use red Loctite on all set screws and follow our included installation instructions.

 

November 12, 2019 by Carlos Mendez

Comments

Joseph Azucena

Joseph Azucena said:

Hello,

I was wondering if this would help the airbag steering column clear LS swaps ? Thank you for your dedication to innovation for the E30 platform!

Matthew Rios

Matthew Rios said:

Will this work with steering rack conversion swaps like e36/e46

DEVIN

DEVIN said:

Hello
with this work for e30 air bag steering column to e36 steering rack ?

Jason

Jason said:

Hello,

Will this work for a E30 airbag column to a Z4 steering rack?

Leave a comment

Please note: comments must be approved before they are published.