All you e36 lovers out there, Condor has something for you too!

 

We've finished our solid BMW e36, e46 & Z4/M Rear Trailing Arm Bushings(RTABs)! These bushings are designed for the street and the track. You will be able to corner faster and get the power down earlier at corner exit. 

We chose UHMW(we use it in all our suspension bushings) because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. We've added steel plates to each side to prevent lateral movement between the bushing material and the aluminum rod. When driven hard on the street or on the track, the rear trailing arms are exposed to extremely large lateral forces. Polyurethane and rubber bushings will deflect and slide, causing your rear alignment settings to change mid-corner. With our bushings, you won't have to worry about dynamic changes in your toe settings, the rear alignment stays in check during hard cornering, braking, and acceleration.

January 22, 2014 by Carlos Mendez

Leave a comment