Z4

The Stealth Black Kinematic Speed Race Shifter is a universal short shifter designed for BMWs with manual transmissions. It features a self-center...

The Satin Aluminum Kinematic Speed Race Shifter is a universal short shifter designed for BMWs with manual transmissions. It features a self-cente...

The Skyway Combo includes almost everything you need to redo the entire drivetrain and suspension of your E46 or E46 M3. If you are serious about ...

SPL Parts TITANIUM Series Rear Camber Arms (RLL) allow for an increased range of rear camber adjustment, necessary for lowered cars and performance...

The Condor Chassis-Mount Race Shifter is a robust short shifter designed for BMWs with manual transmissions. Its classic DTM-inspired aesthetic set...

SPL Parts PRO Front Endlinks (FE) for the BMW E46 3 Series and E85/E86 Z4 chassis feature massive Teflon lined FK 1/2" bearings to provide the high...

Tailor your shifter set up exactly to your preferred ergonomic position. By providing adjustment in both length and rotation, the adjustable selec...

Our CNC machined e46 & e46M rear subframe bushings are designed to replace the OEM subframe bushings and stop the rubbery flex that can affect ...

Our E46 complete subframe reinforcement plate combo is designed for the front subframe carrier, rear subframe and rear shock mounts on the E46 (M3 ...

If you need a new knob in your BMW performance car, this aftermarket knob might be the one for you. Inspired by the vintage mushroom shaped BMW sh...

Our E46 rear subframe reinforcement plates are designed for the back half of the E46 (M3 as well as Non-M). They will help prevent cracks and/or re...

Our CNC machined BMW E46 M3 Differential Bushings are designed to replace the OEM differential bushings and stop the rubbery flex that can affect h...

Our CNC machined differential bushings are designed to replace the OEM diff bushings and stop the rubbery flex that can affect handling and hinder ...

The original equipment manufacturer (OEM) on the BMW E46 were made as rubber bushings. These original rubber control arm bushings were designed fo...

Much like our tall weighted shift knob the "Shorty" was inspired by the vintage mushroom shaped BMW shift knobs from the 80's found in road, race a...

Introducing the "Roundie" our new teardrop-shaped shift knob. Thanks to its smooth lines & short, sleek design, it looks good in any BMW. Not o...

The Lowest Steel Side Mount Brackets OMP Offers, OMP HC/733E. FIA Approved. OMP low profile steel side mounting brackets. 3mm thick steel mountings...

Our E46 front subframe reinforcement plates are designed for the front subframe carriers of the E46 (M3 as well as Non-M). They will help prevent c...

Protect your E46's cast aluminum rear spring perch from damage with our steel Rear Trailing Arm/Spring Perch reinforcements. They're specifically d...

Have you ever had your BMW towed or hot pulled at the race track only to find out after the fact that in attaching a tie down hook to your control ...

The e30, E36 & E46 chassis are getting older, and If you've been racing or drifting, you may need to reinforce the front control arm mounting p...

Our CNC machined control arm brackets are made of 6061-T6 aluminum and are fitted with a Delrin insert. Designed for the street or the track, they ...

Our E46 front subframe & engine mount reinforcement plates will help prevent cracks or repair cracked engine mounting points on the e46 subfram...

Our Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat, and up to 450 degrees F of ...