Skip to content
Condor Speed Shop E36 subframe installation instructions

Condor Speed Shop E36 subframe installation instructions

Please note that you do not need to use any grease or lubrication when installing any of our UHMW bushings. Make sure the subframe is clean and dry. Keep the aluminum inserts inside of the lower subframe bushing when pressing them in. Use a rubber mallet to set them in place.

• All Aluminum inserts press upwards into the bushing from the bottom.
• All lower bushings have OEM washer silhouette shape.
• Reuse OEM washers.
• Front bushings have smallholes and a recess for stockchassis studs.
• Rear bushings have large holes.

When Installing the differential bushings, the front diff bushing should be installed from the front of the subframe towards the back, with the flanged end pointing towards the front of the car.
Previous article Installation guide for Condor E36 door cards.
Next article Condor Speed Shop E46 subframe and differential installation instructions

Leave a comment

Comments must be approved before appearing

* Required fields