Products

We've updated the design on our BMW  e21 and e21 Rear Trailing Arm Bushings! ...When installing E30 Weld-in Rear Camber and Toe Correction Kits, so...

We've updated the design on our BMW e30 (318 323 325 M3) Rear Trailing Arm Bushings! ...When installing E30 Weld-in Rear Camber and Toe Correction ...

We've updated the design on our BMW e30 IX Rear Trailing Arm Bushings! ...When installing E30 Weld-in Rear Camber and Toe Correction Kits, solid re...

Our solid BMW e36 Rear Trailing Arm Bushings (RTABs) are designed for the street and the track. You will be able to corner faster and get the power...

Our solid BMW e46 Rear Trailing Arm Bushings (RTABs) are designed for the street and the track. You will be able to corner faster and get the power...

Our Offset Rear Trailing Arm Bushings (RTABs) are perfect for the street and the track.  They're designed to help correct rear toe-in and toe-out i...

We've updated the design on our BMW Z3/M Rear Trailing Arm Bushings!...When installing E30 Weld-in Rear Camber and Toe Correction Kits, solid rear ...

Our solid BMW Z4/M Rear Trailing Arm Bushings (RTABs) are designed for the street and the track. You will be able to corner faster and get the powe...

These UHMW bushings will improve the handling of your Vintage '02 by creating a solid pivot point between the rear subframe and the trailing arms, ...

Condor Speed Shop in collaboration with Snycro Design Works brings you the best rear trailing arm monoball bearing on the market. While at home on ...

This is a must-have reinforcement. The front mounting point of the rear trailing arm is a known area of failure on track driven E36s. Our 2-piece r...

When you upgrade the rear shocks, the stiffer dampening can wreak havoc on your upper shock tower sheet metal. Our .125 thick Rear Shock Tower Rein...

Condor Speed Shop's E30 Front Subframe Engine Mount Reinforcement Plates will help prevent/repair the common problem of cracked engine mounting poi...

Condor Speed Shop E36 Front Subframe Engine Mount Reinforcement Plates will help prevent or repair the common problem of cracked engine mounting po...

Our E46 front subframe & engine mount reinforcement plates will help prevent cracks or repair cracked engine mounting points on the e46 subfram...

The e30, E36 & E46 chassis are getting older, and If you've been racing or drifting, you may need to reinforce the front control arm mounting p...

When upgrading the front sway bar, the mounting points become the weak link. Our weld-in steel swaybar reinforcements will significantly strengthen...

Our rear shock tower reinforcement plates are a necessary addition to any track car. The rear towers are known to be a weak spot on the e30 chassis...

If you've upgraded your drivetrain with an engine swap or a turbo, you may need to reinforce the differential mounting points on the rear subframe....

Our .125" steel reinforcement plates are designed to reinforce the subframe mounting points on the chassis of your e36. This is where cracks usuall...

Rear subframe failure is a common problem in the BMW E46, and the M3 model did not get factory sheetmetal rear subframe reinforcement. However, our...

When you upgrade the rear sway bar on an e36, the thicker bar can wreak havoc on the sway bar mounts on the subframe. Our 2-piece Rear Sway Bar Rei...

When upgrading the rear sway bar on an e30, the rear trailing arm mounting points become the weak link. We've seen them crack over time and complet...

Refresh your front suspension without replacing your entire carrier. These replacement inserts are designed for use with Treehouse-style TrackCAB s...