Products

Solid Rear 12mm Subframe Riser Bushing Set for the 318ti and Z3. Solid Rear 12mm Subframe Riser Bushings are designed to extend the life of your re...

SPL Parts TITANIUM Series Rear Camber Arms (RLL) allow for an increased range of rear camber adjustment, necessary for lowered cars and performance...

Our E30 rear chassis reinforcement plates are designed to be installed on the back half of the E30. They will help prevent cracks or repair cracked...

The rear half of the E36 chassis contains several known stress points that can fatigue or crack under increased grip, power, and suspension load. ...

Rear subframe failure is a well-documented issue on the BMW E46 chassis, and notably, the E46 M3 did not receive factory sheet metal reinforcement ...

Stock rubber lower shock mounts fail prematurely, especially in racing conditions. We have tested a variety of rear shock mounts, and decided to de...

These Solid Rear Delrin shift carrier bushings get rid of that annoying side to side sloppy play in your shifter by replacing the original flimsy r...

Stock rubber lower shock mounts fail prematurely, especially in racing conditions. We have tested a variety of rear shock mounts, and decided to de...

Stock rubber lower shock mounts fail prematurely, especially in racing conditions. We have tested a variety of rear shock mounts, and decided to de...

Upgrading rear shocks or running stiffer shock mounts places additional load on the factory rear shock towers. Over time, that stress can fatigue o...

Condor stainless steel E36 rear strut bar. Triangulate your rear shock mounts with our lightweight strut brace to make your rear suspension more pr...

Introducing the Condor stainless steel E46 rear strut bar. Triangulate and reinforce your rear shock mounts with our lightweight strut brace to mak...

The rear half of the E36 chassis is prone to cracking as power, grip, and suspension loads increase. Stress typically concentrates at the rear subf...

Our solid BMW 1 Series Rear Subframe Bushings are designed for the street and the track.When the 1 Series is driven hard on the street & on the...

Our solid BMW E9X Rear Subframe Bushings are designed for the street and the track. We use UHMW in all our suspension bushings because it is stiff,...

Solid Rear Subframe Bushing Set for the 318ti, Z3 & Z3M. The subframe and differential mounting points are the heart of the rear suspension in ...

Solid Rear Subframe Bushing Set - UHMW with aluminum sleeves.  The subframe and differential mounting point is the heart of the rear  suspension in...

Solid Rear Subframe Bushing Set - UHMW with aluminum sleeves.  The subframe and differential mounting point is the heart of the rear  suspension in...

Solid Rear Subframe Bushing Set - UHMW with aluminum sleeves.  The subframe and differential mounting point is the heart of the rear  suspension in...

Our solid e36 rear subframe bushings are designed for and proven on the street and the track. We use UHMW for all our suspension bushings because i...

Our CNC machined e46 & e46M rear subframe bushings are designed to replace the OEM subframe bushings and stop the rubbery flex that can affect ...

This washer (BMW Stopper) will replace the OEM washer needed for subframe mount installation. Subframe mounts are not included. You will receive 2 ...

Protect your E46's cast aluminum rear spring perch from damage with our steel Rear Trailing Arm/Spring Perch reinforcements. They're specifically d...

 We've updated the design on our 318ti Rear Trailing Arm Bushings. ...When installing E30 Weld-in Rear Camber and Toe Correction Kits, solid rear t...