Drivetrain Components

Under hard braking and cornering the factory rubber mounts allow the engine lean forward and move from side to side. Our solid UHMW engine mounts w...

We've redesigned our solid 24 valve swap solid UHMW motor mounts! The angle hasn't changed, but we have changed the stud locations for the BMW E30....

These Solid Delrin brake or clutch pedal bushings get rid of that annoying side to side sloppy play in your BMW's worn out pedals.   This item fits...

Our E36 Differential Bushings are designed for both the street and the track. You won't have to worry about any more rubbery flex in your diff moun...

Stop unwanted transmission movement. Our UHMW mounts will keep your transmission and the shift linkage firmly in place.Fitment:e36 318, 323, 325, 3...

Our universal BMW engine risers are designed for extremely low BMWs with less than ideal oil pan clearance. When installed, our risers create 20mm ...

Under hard braking the stock mounts allow the M20 to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and driv...

Our 70A poly transmission mounts are the solution if you are trying to improve performance while minimizing vibration and NVH. They are "bolt-throu...

Our CNC machined differential bushings are designed to replace the OEM diff bushings and stop the rubbery flex that can affect handling and hinder ...

Replacing old worn out rubber hydraulic hoses is a must!  Braided stainless steel lines are the best way to improve pedal feel. This braided stainl...

Replacing old worn out rubber hydraulic hoses is a must!  Braided stainless steel lines are the best way to improve pedal feel. This braided stainl...

Stop unwanted transmission movement. Our UHMW mounts will keep your transmission and the shift linkage firmly in place.For BMW e30 (318, 323 and 32...

If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to l...

Our UHMW differential bushing is designed for the street and the track. We use UHMW in all our suspension bushings because it is stiff, has almost ...

Our Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat, and up to 450 degrees F of ...

If you make big power, you need our 14mm diff bolt upgrade. We supply an OEM BMW 10.9 14mm bolt and the matching front differential bushing. *Pleas...

The clutch pivot pin fitted to almost all BMWs is a plastic item – the failure of this part is well documented, as it flattens itself off with use...

The clutch pivot pin used on almost all manual BMWs is a plastic wear item – the failure of this part is well documented, as it flattens itself wit...

These engine mounts are designed for extremely low e30s with oil pan clearance issues. They are 20mm taller than OEM mounts to add necessary clear...

Replacing old worn out rubber hydraulic hoses is a must!  Braided stainless steel lines are the best way to improve pedal feel. This braided stainl...

This combo includes our popular 24v Swap mounts, a pair of UHMW or Polyurethane transmission mounts and our ultra-light aluminum G260 transmission ...

Our solid Delrin accelerator pedal bushings will get rid of that annoying side-to-side sloppy play in your BMW's worn-out gas pedal. Replaces OEM p...

Our CNC machined BMW E46 M3 Differential Bushings are designed to replace the OEM differential bushings and stop the rubbery flex that can affect h...

Our solid UHMW mounts have been designed with one thing in mind... To increase on-track performance by lowering the center of gravity in your BMW. ...