Latest Condor Arrivals

If you plan on swapping in an OBD1 M60 or M62 engine into your e36, our plug and play harness adapters are the easiest way to go.  Installation In...

If you plan on swapping in an M62, M62TU or S62 engine into your e36, our plug and play harness adapters are the easiest way to go. Harnesses inclu...

If you plan on swapping in an M52TU, M54 or S54 engine into your e36, our plug and play harness adapters are the easiest way to go. Harnesses inclu...

If you plan on swapping in an OBD1 M60 or M62 engine into your e30, our plug and play harness adapters are the easiest way to go.  Installation In...

If you plan on swapping in an M62, M62TU or S62 engine into your e30, our plug and play harness adapters are the easiest way to go. Harnesses inclu...

If you plan on swapping in an M52TU, M54 or S54 engine into your e30, our plug and play harness adapters are the easiest way to go.  Harnesses incl...

If you plan on swapping in a 24 valve engine into your e30, our plug and play harness adapters are the easiest way to go. Installation Instructio...

Solid M30 & S38 UHMW engine mounts for your E34. Under hard braking the stock mounts allow the engine to pitch forward and to the side. These s...

These engine mounts are designed for extremely low e30s with oil pan clearance issues. They are 20mm taller than OEM mounts to add necessary clear...

Under hard braking and cornering the soft factory rubber mounts allow the engine lean forward and move from side to side. Our solid UHMW engine mou...

Our solid UHMW mounts have been designed with one thing in mind... To increase on-track performance by lowering the center of gravity in your BMW. ...

Solid UHMW 525i engine mounts for your M50tu powered E34. Under hard braking the stock mounts allow the motor to pitch forward and to the side. The...

We use these in all our spec cars to simplify the cooling system.  These plates bolt to the back of the M20 head allowing you to delete the heater ...

Solid UHMW 325 IX motor mounts for your E30 chassis BMW. Under hard braking the stock mounts allow the m20 to pitch forward and to the side. These ...

Our Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat, and up to 450 degrees F of ...

Under heavy braking and hard acceleration the stock E9X M3 engine mounts are not up to the task. Our solid UHMW replacement engine mounts stiffen t...

Under hard braking the stock mounts allow the engine lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatica...

Our universal BMW engine risers are designed for extremely low BMWs with less than ideal oil pan clearance. When installed, our risers create 20mm ...

Under hard braking and cornering the factory rubber mounts allow the engine lean forward and move from side to side. Our solid UHMW engine mounts w...

Under hard braking the stock 2002 engine mounts allow the m10 to pitch forward and to the side. These two piece solid UHMW and aluminum replacement...

These solid UHMW engine mounts are made specifically for BMW's dual overhead cam 4 cylinder, the M42. Under hard braking the stock mounts allow the...

Condor's M10 motor mounts will dramatically change the responsiveness of your 316e or 318i. Fits:1982-1987 316e, 318i Installation instructions:Th...

These solid UHMW motor mounts are made specifically for swapping the big six (m30) into an e30 chassis. Confirmed to work with Goodntight's m30 swa...

We've redesigned our solid 24 valve swap solid UHMW motor mounts! The angle hasn't changed, but we have changed the stud locations for the BMW E30....