E30 Components

Polycarbonate rear 1/4 windows for E30 coupes. Manufactured from high-quality UV protected polycarbonate Approximately 50% weight savings compared...

All Motorsport Hardware fasteners are hardened and tempered to strength class 10.9 and are certified by ISO/TS 16949 and ISO 9001 by TÜV.  All stu...

Ultra-light aluminum G260 transmission brace for 24V engine swaps. This brace must be used if swapping a 24v motor into an e30, with the original G...

Motorsport Hardware Black Conical Seat Lug Nut. 17mm black lug nut fits 12x1.5 thread wheel studs. Common for most BMWs made before 2012. Durable, ...

Timing belts are toothed drive belts that transmit rotational force from the crankshaft to the camshaft. Unlike standard accessory belts, they also...

These solid UHMW motor mounts are made specifically for swapping the big six (m30) into an e30 chassis. Confirmed to work with Goodntight's m30 swa...

Solid Rear 12mm Subframe Riser Bushings are designed to extend the life of your rear tires. When you lower an E30, you will begin to wear out the i...

Increase negative camber on your e30 or e36 by swapping in E46 control arms with our solid conversion control arm mounts. They will widen the front...

Single NACA ducts that fit all of our window kits perfectly! 

Plug-N-Play Standalone Engine Management System With the MegaSquirtPNP EMS, we've simply taken all of the wiring homework and labor out of the proj...

Our 70A poly transmission mounts are the solution if you are trying to improve performance while minimizing vibration and NVH. They are "bolt-throu...

These engine mounts are designed for extremely low e30s with oil pan clearance issues. They are 20mm taller than OEM mounts to add necessary clear...

Clean up the interior of your BMW race car with our door pull kit. Each kit comes with 2 straps, 2 Rosettes & 4 screws. 

Condor Speed Shop's E30 Front Subframe Engine Mount Reinforcement Plates will help prevent/repair the common problem of cracked engine mounting poi...

Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates.If you have a lowered or track prepped BMW then y...

Gain increased handling while achieving a more aggressive look. Can also be used to clear suspension components and aftermarket brake kits. Perf...

All Motorsport Hardware fasteners are hardened and tempered to strength class 10.9 and are certified by ISO/TS 16949 and ISO 9001 by TÜV.  All stu...

Show your support with Condor tire stencils. Check out our stencils for other tire brands. Fits 15-17" tires. Height of the letters approximately 2".

Gain increased handling while achieving a more aggressive look. Can also be used to clear suspension components and aftermarket brake kits. Perf...

Gain increased handling while achieving a more aggressive look. Can also be used to clear suspension components and aftermarket brake kits. Perfe...

Our rear shock tower reinforcement plates are a necessary addition to any track car. The rear towers are known to be a weak spot on the e30 chassis...

This kit includes new bolts and spacers for our 12mm riser bushings. Use thread locker during install. Recommended for street or race use. 4 Diff S...

Condor's M10 motor mounts will dramatically change the responsiveness of your 316e or 318i. Fits:1982-1987 316e, 318i Installation instructions:Th...

The stock rubber steering coupler is known to degrade over time, resulting in a vague and disconnected steering feeling. Simplify your steering sha...